Vision Refurbishments LtdWe achieve your vision Which? Trusted Trader
020 3987 4923

Underground Sleeper pond

Tap + for quick options

Skip to main content
Print

Underground Sleeper pond

I’m building a new pond half in ground and half above ground. I want to use sleepers but worried about the below ground rotting. They will be sat on a concrete footing, If I wrapped them with dpm so no water or soil could get to the sleepers would this work? I’m also thinking if I paint the underground sleepers with some dpm paint to seal Thanks

=================

Answer-

Building an Underground Sleeper Pond

Based on your description, using sleepers for an underground/above-ground pond is certainly possible, but you’ll need to take some precautions to prevent the below-ground sleepers from rotting.

Here’s a step-by-step approach that should work well:

1. **Concrete Footing**: As you mentioned, placing the sleepers on a concrete footing is a good idea. This will provide a stable, level base for the pond and help protect the sleepers from direct contact with soil.

2. **Waterproof Wrap**: Wrapping the below-ground portion of the sleepers with a damp-proof membrane (DPM) is an excellent solution. This will create a barrier to prevent water and soil from coming into direct contact with the wood, which is the primary cause of rot.

– Make sure the DPM is rated for underground use and that you overlap the seams by at least 6 inches to create a continuous barrier.
– Secure the DPM tightly around the sleepers using a suitable adhesive or mechanical fasteners.

3. **Waterproof Coating**: In addition to the DPM wrap, you can also apply a waterproof coating or sealant to the below-ground portion of the sleepers. This will provide an extra layer of protection.

– Look for a high-quality wood sealant or marine-grade epoxy paint that is specifically designed for use in damp or submerged environments.
– Apply the coating according to the manufacturer’s instructions, ensuring full coverage and a smooth, even finish.

4. **Above-Ground Sleepers**: For the above-ground portion of the pond, you can use untreated sleepers, as they will not be in direct contact with soil or water. However, it’s still a good idea to apply a weatherproofing sealant or paint to protect them from the elements.

5. **Pond Lining**: Once the sleeper walls are prepared, you can install a suitable pond liner, such as a flexible PVC or EPDM liner, to create the watertight enclosure for your pond.

By following these steps, you should be able to create a long-lasting, underground sleeper pond that is resistant to rot and moisture damage. Remember to always follow local building codes and regulations when constructing any outdoor water feature.

==========================
Contact Us :
📞 (0)20 3987 4923
📱 Mob: 07404960364
📧 info@vrltd.uk
📍 566 Chiswick High Street, W4 5YA, London

Table of Contents