Vision Refurbishments LtdWe achieve your vision Which? Trusted Trader
020 3987 4923

Converting Shed into Barbering Salon

Tap + for quick options

Skip to main content
Print

Converting Shed into Barbering Salon

Hi, So I’m converting my garden shed into a barbering salon. I have all my business permissions etc. So that’s all sorted. The shed has now been completely emptied. Here are my questions; 1) Do I need to treat the wood on the walls and ceiling at all before I start putting on the green vapour barrier plastic sheeting? 2) How do I put the green vapour barrier plastic sheeting on? 3) My Electrician is coming out once the sheeting is up to start the first stage of his work before I put the insulation in. Once the insulation is in, I will be creating Pallet Wood walls and ceiling. Do I need to treat my pallet wood in any particular way before I start nail gunning it onto the studs? Thanks for your help!

==========================

Answer:-

1) Treating the Wood Before Vapor Barrier

Yes, you should treat the existing wood, especially if it’s untreated or showing any signs of moisture damage, decay, or pest activity. Apply a wood preservative or primer-sealer that’s suitable for the wood type. This will:

  • Prevent rot and insect damage
  • Create a better surface for the vapor barrier to adhere to
  • Extend the life of your structure

Make sure the wood is completely dry before applying any treatment and allow proper curing time before installing the vapor barrier.

2) Installing Green Vapor Barrier Plastic Sheeting

The vapor barrier should go on the warm side of the insulation (interior side in most climates):

  • Start from one corner and work systematically
  • Overlap seams by at least 6 inches
  • Seal all seams with appropriate vapor barrier tape
  • Staple every 6-12 inches along studs, keeping the plastic taut but not overstretched
  • Cut carefully around electrical boxes and seal these penetrations with tape
  • Ensure continuous coverage – any gaps defeat the purpose

3) Treating Pallet Wood

Absolutely treat your pallet wood before installation:

  • Clean thoroughly – Remove all dirt, debris, and any existing finishes
  • Sand smooth – Pallet wood can be rough and may have splinters
  • Apply wood conditioner if using softwood pallets
  • Prime and seal – Use a high-quality primer suitable for the wood type
  • Consider fire treatment – Depending on local building codes for commercial spaces, you may need fire-retardant treatment

Additional considerations for a barbering salon:

  • Choose treatments that are low-VOC since this is an enclosed commercial space
  • Consider antimicrobial treatments given the nature of the business
  • Ensure all treatments are fully cured before clients use the space

==========================
Contact Us :
📞 (0)20 3987 4923
📱 Mob: 07404960364
📧 info@vrltd.uk
📍 566 Chiswick High Street, W4 5YA, London

Table of Contents