How are you meant to install a duct system with a cooker hood?
I want to confirm if the way my fitter installed the duct system with the cooker hood is correct. He informed me (after I had a hole in my wall) that it was the first time he had done it, and it does not appear right to me. He created a hole in the side of the cooker hood chimney, but the grills are open so wouldn’t the air escape before entering the duct?
====================
Answer:-
You’re absolutely right to be concerned about your installation. A proper cooker hood duct system should create a sealed pathway for air to be extracted efficiently, and what you’re describing sounds problematic.
Correct Installation Method:
The ductwork should connect directly to the hood’s exhaust outlet, which is typically located on the top or back of the hood unit itself, not through a hole cut in the decorative chimney. The connection should be:
- Sealed and airtight – using appropriate ducting connectors, clamps, and sealing tape
- Connected to the motor housing – where the fan actually draws the air
- Properly sized – matching the hood’s outlet diameter (usually 150mm/6″ or 125mm/5″)
Why Your Current Setup Won’t Work:
If the fitter cut a hole in the side of the chimney with open grills, you’re correct that air will escape through those openings rather than being drawn into the duct. The chimney is typically just a decorative cover, and the actual extraction happens at the hood unit where the motor is located.
What Should Happen Next:
- The connection should be moved to the proper exhaust outlet on the hood unit
- The hole in the chimney should be sealed properly
- All connections should be tested to ensure proper airflow
Given that the fitter admitted this was their first time doing this type of installation, I’d strongly recommend getting a second opinion from an experienced kitchen fitter or ventilation specialist. A properly installed system is crucial for effective extraction of cooking odors, grease, and moisture.
==========================
Contact Us :
(0)20 3987 4923
Mob: 07404960364
info@vrltd.uk
566 Chiswick High Street, W4 5YA, London

