Vision Refurbishments LtdWe achieve your vision Which? Trusted Trader
020 3987 4923

Will our bath fall through our ceiling?

Tap + for quick options

Skip to main content
Print

Will our bath fall through our ceiling?

We are remodelling our bathroom and are looking to put in a deep bathtub (omnitub duo plus) 1050x1250x650mm due to the dimensions of the room. This holds 457litres when full. However, since purchasing the tub we are concerned about the weight on the timber floor. Below the pine floorboards we have single timber joists that are 5cm in width and 40cm apart. Will these be able to hold the bathtub which will be on 6 legs? On either side of the bathtub there is a stone wall and brick wall. Will we require any additional joists or noggins to support the weight of the tub and 15 stone person when filled?

==============

Answer:-

This is a valid concern, as a filled bathtub with a person can create substantial weight loads on your floor structure. Let me analyze your situation.

The bathtub you’ve purchased (Omnitub Duo Plus) holds 457 liters of water when full. Water weighs approximately 1kg per liter, so:

  • Water weight: 457kg (about 1,007 lbs)
  • Person weight: 15 stone (about 95kg or 210 lbs)
  • Bathtub weight: Likely 50-80kg depending on material
  • Total weight: Approximately 600-640kg (1,320-1,410 lbs)

Your floor structure consists of:

  • Pine floorboards
  • 5cm (2 inch) wide timber joists
  • Joists spaced 40cm (16 inches) apart
  • Tub distributed on 6 legs

Your current joist system is concerning for supporting this much weight. Typical residential floor joists are designed for loads of about 1.5-2 kN/m² (150-200 kg/m²), but your concentrated load exceeds this significantly.

The good news is that you have stone and brick walls on either side of the tub area, which could provide additional support if utilized properly.

Here are my recommendations:

  1. Consult a structural engineer: Before proceeding, have a professional assess your specific situation. This is the safest approach.
  2. Consider additional support measures:
    • Install “sister joists” alongside existing ones
    • Add cross-bracing between joists
    • Install a steel beam or larger timber beam underneath to distribute the weight
    • Create a reinforced platform specifically designed to spread the load
  3. Placement considerations:
    • Position the tub so its legs align with joists where possible
    • Consider positioning the tub against the solid walls to transfer some weight directly

Without seeing the exact structure of your floor and understanding the span of your joists, I can’t give a definitive answer on whether your floor will fail. However, based on the information provided, your current joist system likely needs reinforcement to safely support this bathtub when filled with water and occupied.

==========================
Contact Us :
📞 (0)20 3987 4923
📱 Mob: 07404960364
📧 info@vrltd.uk
📍 566 Chiswick High Street, W4 5YA, London

Table of Contents