Vision Refurbishments LtdWe achieve your vision Which? Trusted Trader
020 3987 4923

Cavity wall drip tray issue in 1930’a build (Watford)

Tap + for quick options

Skip to main content
Print

Cavity wall drip tray issue in 1930’a build (Watford)

Hi there. I have a 1930’s property with a leak above the front bay window and wondering if it could be due to the cavity wall drip tray. I am on the first floor and have had some movement to the bay, suspected to the ground floor having windows replaced with UPVC with inadequate support. My window was stuck shut and leaks above bay window too. Replaced the tiles on the sloped roof above the bay which seemed to do the trick initially, but have since had the window repaired and the leak is back. It’s localised directly to the ceiling above. I’m wondering if there has been some disturbance due to the window repair and my question is: – Do 1930’s builds commonly use cavity drip trays? – Is there a chance the outward movement to the bay has created some sort of gap so the drip tray is no longer routing the water away correctly? – How do I fix it?

========================

Answer;-

Let me help you analyze this issue step by step:

Regarding 1930s cavity wall drip trays:
1. Yes, 1930s properties commonly used lead cavity trays (also called DPCs – damp proof courses) above windows and bays
2. These were typically installed to divert any water that gets into the cavity outward through weep holes

Your situation sounds complex with multiple potential issues:

1. Movement in the bay window structure:
– The inadequate support from UPVC installation could indeed have caused movement
– This movement can absolutely affect how the cavity tray functions
– If the bay has moved outward, this could create gaps or change the angle of the tray

2. Potential causes of the leak:
– The cavity tray may have been disturbed during window repairs
– The tray could be cracked or damaged from the structural movement
– The weep holes might be blocked or misaligned due to movement
– There could be gaps between the tray and masonry due to settlement

To fix this:

1. First steps:
– Have a qualified surveyor inspect the bay structure to assess movement
– Consider having a damp specialist use a borescope to inspect the cavity tray condition

2. Potential solutions:
– If the tray is damaged: Install a new cavity tray system (though this requires partial wall removal)
– If it’s just movement: The bay structure may need reinforcement first
– Check and clear any weep holes visible above the window
– Consider installing additional weep holes if drainage is insufficient

3. Important considerations:
– Don’t attempt cavity tray replacement without addressing any structural issues first
– Get multiple professional opinions as this involves both structural and waterproofing concerns
– Document any visible movement for insurance purposes

==========================
Contact Us :
📞 (0)20 3987 4923
📱 Mob: 07404960364
📧 info@vrltd.uk
📍 566 Chiswick High Street, W4 5YA, London

Table of Contents