Small Damp proof injection job done in extension
I recently had a small damp proof problem in my extension (internal wall) that required a damp proof cream (ultracure) injection, which was done. However after approx 5 weeks a mark appeared below skirting board level and a small spot mark, that looked like damp. The damp proofer came back and put a moisture meter on it and said it was dry. The explanation he gave is that the injection cream spreads and it can sometimes come through the plaster leaving a mark that looks like damp but isn’t, and its nothing to worry about. The patch is getting slightly bigger and another small mark has now appeared 4 or 5 inches to the side of the 1st mark. I would greatly appreciate some feedback as to if the explanation from the damp proofer is plausible, because I’m scratching my head with this one and my wife feels the job hasn’t been done properly. Many Thanks in advance.
=================
Answer-
The explanation given by the damp proofer is plausible, but there are some aspects of the situation that warrant further investigation. Let’s break down the scenario and consider some possibilities:
- Damp proof cream migration: The damp proofer’s explanation that the injection cream can spread and come through the plaster is indeed possible. Some damp proofing creams are designed to diffuse through the masonry to create a continuous damp proof course. This process can sometimes lead to visible marks on the surface, especially if the wall was not fully dry when the treatment was applied.
- Residual moisture: Even though the damp proofing has been done, it can take several months for residual moisture in the wall to fully dry out. The marks you’re seeing could be the last of the moisture working its way out of the wall.
- Rising damp vs. other sources: It’s important to ensure that the source of the damp was correctly identified. If the problem is not rising damp but instead penetrating damp from another source (like a leak or condensation), the damp proof injection won’t solve the issue.
- Effectiveness of the treatment: The fact that new marks are appearing and existing ones are growing larger is concerning. This could indicate that the damp proofing treatment wasn’t entirely effective or that there’s another source of moisture.
- Plaster condition: If the plaster is hygroscopic (tends to absorb moisture from the air), it might continue to show damp patches even if the underlying wall is dry.
Given the situation, here are some suggestions:
- Monitor the affected areas closely over the next few weeks. Take photos and measure the size of the marks to track any changes.
- Ask the damp proofer to come back and do another inspection, preferably with different types of moisture meters (surface and deep-reading types). Also, ask them to check for other potential sources of damp.
- Consider getting a second opinion from another damp specialist or a chartered surveyor who specialises in damp issues.
- Check if there’s a guarantee for the work done. Most reputable damp proofing companies offer guarantees for their treatments.
- Ensure good ventilation in the room to help any residual moisture evaporate.
==========================
Contact Us :
(0)20 3987 4923
Mob: 07404960364
info@vrltd.uk
566 Chiswick High Street, W4 5YA, London

